SurfaPore ThermoDryŽ is a Nanotechnology and Microtechnology additive for making any acrylic water based paint thermal insulating and water repelling.
SurfaPore ThermoDryŽ "blocks" the thermal transfer and makes paints water repelling, protecting against mosture. It reduces water condensation, resisting mould growth on walls. Thermal energy "travels" through walls and other surfaces. Therefore, large amounts of energy are required for cooling in the summer and heating in the winter. SurfaPore ThermoDry does not only reflect themal radiation, but resists heat transfer!
General Characteristics & Applications:
- Nanotechnology and Microtechnology Additive for making any water based acrylic paint water repelling and thermal insulating
- Helps in conserving energy
- Applicable on internal or external walls
- Protects against mould growth
- Extends paint life
- Increases paint volume by 60%
Certification & Testing
Independent European certification agancies certify that the use of SurfaPore ThermoDry in common water-based acrylic paints reduces their thermal conductivity by 4 times (0,1292 W/(mK), EN 12667).
Application Note:
Select paints for internal or external use that can be diluted with water by 5-10% before use. Cannot be added in solvent based paints.
Shake and stir vigorously before use. It is possible that a solid layer may have developed on top, which will disappear by shaking well or stirring. Ensure tha the container that you selected matches your selected volume of paint. By using the containers of paint and SurfaPore ThermoDry, empty the contents of one container into the other, until your mix is completely homogeneous. Apply your mix in the same manner you would have applied the paint you selected. It does not alter drying time. It does not alter colour tone. It does not alter texture in flat/matte finish paints. In satin or glossy finish paints test before application.